Stone and stainless steel: powerful partners

The anchor dowel is today's modern partner for natural Stone (http://g603.net) in rear-ventilated outside wall claddings. The connection between the partners usually consists of three or four holes of 8 to 12 millimeters diameter drilled in the edges of the natural Stone (http://g603.net) panel and (http://maplered.com) steel anchor dowels of 5 to 8 millimeters diameter fed at least 25 millimeters into these holes. These dowels are in turn connected by metal brackets to the load-bearing wall or a base construction. The advantage of this connection results from the Material (http://g654.org) properties of the stainless steel. The steel can bear very high loads with relatively small dimensions and (http://maplered.com) , in contrast to natural Stone (http://g603.net) , is insensitive to deformation. For all types of fixing, it is necessary to ensure that unrestricted deformation of the natural Stone (http://g603.net) Slabs (http://www.VerdeUbatuba.com) is possible. In rigid fixing systems, such as the newly developed rear-cut systems, which do not permit any deformation at the fixing points in the natural Stone (http://g603.net) panel, the possibility of movement must be provided by mounting a base construction.